Ihr Warenkorb ist leer
Ihr Warenkorb ist leermatt-h
Bewertet in den USA am5. Oktober 2024
My old chainring was worn out, so it was time to renew. I had switched cranks, so appreciated another review showing that I could use the chain pick up pin in one of two positions. Installed and runs like new.
Leeman McMuffin
Bewertet in Großbritannien am 20. August 2019
Came without hidden bolt, had to cut out the one from old chainring and slap it together like some ghetto mechanic.Needed the part asap, didn't have the time to send it back.I guess the fact that this price is a bit better than most means you don't get the complete product.Otherwise the part is in good condition.
bill
Bewertet in den USA am20. Juli 2018
This chainring is a universal fit for both hidden (one bolt behind the crankarm) and standard (all chainring bolts accessible from both sides) cranksets.There are two outer guide pins installed (the pin that keeps the chain from getting jammed between the crank arm and spider, should the chain ever come off of the outer ring while riding. The guide pin that is not used needs to be punched out, and a plastic cap (included in the package) inserted in it's place.If your crankset is the hidden bolt type, you need to remove the pressed in nut from the old chainring, using the proper press tool, or bang it out with a hammer and backing plate, with a piece of wood or metal between the hammer and nut. this nut then needs to be pressed in to the proper hole in the new chairing, in the proper orientation (the flange of the nut on the outer side)If you are not comfortable with performing these steps, you are much better off having the job done at your local bike shop.
Jack Carver
Bewertet in Deutschland am 8. November 2017
... und für einen guten Preis. Schnell geliefert, rangebaut und schon gehts los auf die nächste Trainingsrunde. Die Artikelbezeichnung ist etwas merkwürdig.
ermy
Bewertet in Italien am 8. Juli 2015
veramente ottimo prodotto si adatta bene anche a spider di serie differenti è richiesto solo il girobulloni da 110.per il funzionamento della corona è obbligatorio il montaggio del suo deragliatore dedicato sram force 22con tecnologia yaw.si adatta bene anche a catene 10v.
Produktempfehlungen
